REVEALis D-TAIL LABs fast-flashing panel wipe engineered to remove polishing oils, fillers, and residue before coatings or sealants. It promotes a clean, high-energy surface so protection layers can bond properly.
What REVEAL Does
Dissolves and lifts compound/polish lubricants, silicone, and light shop residues from paint and glass, leaving a crisp, streak-free finish ready for ceramic coatings, sealants, or waxes.
Why You Need REVEAL
True-bond prep clears oils and fillers that can hinder coating adhesion.
Fast, clean flash wipes off without smearing when used correctly.
Detailer-friendly ideal between correction steps and final inspections.
Where to Use It
Clear-coated paint and clear bra/PPF (spot test first)
Exterior glass and gloss plastics
Door jambs and polished metal trims (test first)
Directions
Prep first:Wash, decontaminate (iron remover + clay), and complete any compounding/polishing.
Work on acool, shadedsurface. Shake well.
Spraylightly onto a clean edgeless microfiber(avoid soaking) or mist the panel sparingly.
Wipe a small section ( 40cm40cm / 16″16″) with gentle, overlapping passes.
Immediately flip to adry side(or a second towel) and buff until perfectly clear.
Inspect under strong lighting. Repeat if any haze or residue remains, then proceed with your coating/sealant.
Pro Tip:Usetwo-towel techniqueone damp for application, one dry for the final flash-off. Less product = cleaner, streak-free panels.
Compatibility & Care
Do not use on hot panels or in direct sun.Do not allow to drywithout a final buff.
Always test on sensitive trims, matte/satin finishes, and fresh resprays.
For interior use: not recommended on tinted instrument clusters or soft-touch plastics.
