D-TAIL LAB Detailing Clay Barslift bonded contamination that washing cant touchtraffic film, bugs, resin, light overspray, iron residuesleaving paint smooth and ready for polishing or protection. Available inthree grades(Soft, Medium, Heavy) to match the job and paint type.
Why You’ll Love It
Real decon results rapidly removes embedded grit for a glassy finish before correction/protection.
3 grades, one workflow start Soft on sensitive paint; step up to Medium/Heavy where needed.
Easy to handle 200g bar with good elasticity; stores in its protective box for reuse.
Versatile surfaces safe for painted and chrome surfaces when properly lubricated.
Pairs Well With
Iron remover (chemical decon first):PURGEpH-Neutral Iron & Fallout Remover
Clay lubricant / final gloss:GLAMQuick Wax Detailer
Wash solution (pre/post):FOMOpH-Neutral Car Shampoo
Synthetic alternative for maintenance:Synthetic Clay Towel 3.0
How To Use
Pre-wash & wash:Rinse, then contact-wash withFOMO; rinse thoroughly.
Chemical decon (recommended):SprayPURGEon cool panels, allow reaction, then rinse.
Lubricate:Mist a small section generously withGLAM.
Clay:Flatten a piece of clay. Glide withlight pressurein straight lines until the surface feels smooth. Fold to a clean face as it loads.
Wipe & inspect:Buff residue with a clean microfiber and check under proper lighting.
Protect:Optionally re-wash, then apply your chosen protection (sealant/coating/wax).
Notes:Always test on an inconspicuous spot. Use the least aggressive grade that achieves the goal. Do not clay on dry paint or under direct sun/hot panels.
