D-FENDER – Wash Mitt & Bucket Grit Guard Insert

Grit Guard Wash Bucket InsertPrevent Swirls at the Source

TheGrit Guard Wash Bucket Insertsits at the bottom of your wash bucket to trap dirt below the vane grid. Agitating your mitt against the radial surface dislodges grit so it settles under the guardkeeping itoutof your mitt and off your paint.

Key Benefits

• Reduces scratches/swirlsby isolating abrasive particles beneath the insert.
• Radial vane designhelps scrub and release debris from wash media.
• Fits most bucketsused in detailing workflows (3.56gal / 1323L).
• Durable plastic constructionfor repeated pro use.

Specs

• Insert diameter:11in (263mm)
• Height:63mm (2.5in)
• Bucket fit:Most buckets with ~12in internal diameter

Pairs Well With

• Wash mitt:ORIGIN Microfiber Wash Mitt
• Shampoo:ORIGINUltimate pH-Neutral Detailing Shampoo
• Drying towels:Microfiber Towels Collection

How To Use

1. Set up buckets:Use a two-bucket wash (one soap, one rinse). Place the insert at thebottomof each bucket.
2. Load mitt:Soak yourwash mittwith shampoo solution.
3. Rinse safely:After a panel, scrub the mitt on the insert in therinsebucket to release dirt; keep the mitt below the waterline so grit drops under the guard.
4. Reload & repeat:Return to the soap bucket (with insert) to reload suds; continue panel by panel.
5. After wash:Rinse inserts and buckets; allow to dry before storage.

Notes:Always work on cool panels out of direct sun. Replace worn mitts/towels to minimize marring.